On Off

Cookies are used by

Skip to the beginning of the images gallery

C1 Electric Bicycle Conversion Kit - UK for Black Disc Brake Bike 27.5" (650b) 32H Wheel

More Information
Free Shipping	No

C1 Electric Bicycle Conversion Kit - UK for Black Disc Brake Bike 27.5" (650b) 32H Wheel

Kit Price shown here will change as you choose the optional parts of your kit below

From £1,063.60

To £1,283.59

In stock

C1 Electric Bicycle Conversion Kit - UK for Black Disc Brake Bike 27.5" (650b) 32H Wheel

In stock

From £1,063.60

C1 Motor

Cytronex C1 disc brake motor-Black-32 hole-25kph / 15.5mph + From £200.00

Quantity

Select Rim

Mavic XM119 - Tyre widths 35mm to 69mm, for Schrader valve - HYBRID / ROAD – 19mm internal width. Weight 525g. Clincher type. Black. 27.5". ETRTO 584 x 19+ From £35.00

Quantity

Select Charger

Quantity

Are we installing the kit onto your bike?

Quantity

Cytronex C1 Bottle

Cytronex Bottle Battery with Bluetooth + From £495.00

Quantity

Cytronex C1 Bottle Cage Assembly

Cytronex C1 Bottle Cage + From £135.00

Quantity

Boost Button

Cytronex C1 Boost Button + From £0.00

Quantity

Sensor

Cytronex C1 Sensor with Higo Connector + From £45.00

Quantity

Select Rotor

Quantity

Rotor Bolts

Avid Rotor Bolt kit 6pcs + From £6.00

Quantity

Spokes

Quantity

Nipples

Prolock nipples-Black-2 x 14 mm + From £0.33

Quantity

Bottle Box and Insert

Cytronex C1 bottle box + From £3.64

Quantity

Kit Box

Cytronex C1 Outer kit box + From £5.00

Quantity

Wheel build

Wheel build for standard Cytronex Wheels + From £46.00

Quantity

Tell us about your bike & buy

Tell us about your bike:

Back

* Compatibility

Please confirm that you have checked your cycle is compatible with Cytronex and that your cycle is safe to fit by clicking 'I Agree' below. If you haven't checked yet, you can find compatibility help HERE

Comaptibility

I confirm that:

Motor Template shows motor is suitable for my bicycle
Bottle Holder Template fits in space above the downtube of my bike
At least one rear sprocket (i.e. rear wheel cog) on my bike is attracted by a magnet. (i.e. the sprocket is ferrous)
I understand that I am responsible for safety checking the cycle to which I will fit the Cytronex kit, which should for example, not be fitted to cycles with corroded or damaged forks, low quality forks without adequate strength or forks that have been involved in an accident. Newer bikes should be made to the ISO 4210 standard.

Agree Disagree

Compatibility

Agree

Disagree

Next Step Back a step

* Bottle Holder Position

When you tried the Bottle Holder Template against your bike - please confirm whether the cage will fit in the recommended position (Position 1) or you need to use the alternative position (Position 2).

Position 1

Position 2

Bottle Cage Position

Position 1

Position 2

* Carbon Frame

My bike has a carbon frame

My bike doesn't have a carbon frame

Carbon Frame

My bike has a carbon frame

My bike doesn't have a carbon frame

Please note: this question is required because Carbon Frames require longer sensor cable, due to the enlarged bottom bracket shell.

Additional Information

Next Step Back a step

* Gears

Derailleur Gears or single speed

Hub Gears

Gears

Derailleur Gears or single speed

Hub Gears

* Suspension

Front Suspension

Rear Suspension

No Suspension

Suspension

Front Suspension

Rear Suspension

Next Step Back a step

Please note bikes with rear suspension usually do not have enough space for the Cytronex bottle, please be sure you have checked clearance carefully using the Bottle Cage Template?

Cytronex has not been tested yet in rough off road conditions such as downhill mountain biking. The use of a Cytronex system in such conditions will void the Warranty.

Cytronex is a custom made bespoke product so we will produce cables to suit your bicycle.
We recommend that you have your bicycle and a tape measure next to you as you add these measurements, and double check each dimension.

Dimension 1

Please measure from the centre of the rear axle to the centre of the pedal crank. For a tandem this means the centre of the front crank.

Add Dimension 1

Maximum 7 characters

Dimension 2

Please measure from the centre of the pedal crank to the centre of the top bottle cage bolt. For a tandem this means the centre of the front crank - the Cytronex bottle should be positioned in the front triangle.

Add Dimension 2

Maximum 7 characters

Dimension 3

With the front wheel pointing forwards in line with the bicycle frame - please measure from the centre of the top bottle cage bolt to the centre of the front axle.

Add Dimension 3

Maximum 7 characters

Dimension 4 (Add only dimension 4 or 5)

If you have a flat handlebar please measure from the centre of the top bottle cage bolt to the centre of the inside edge of the gear shift mount.

Add Dimension 4

Maximum 7 characters

Dimension 5 (Add only dimension 4 or 5)

If you have a drop handlebar please measure from the centre of the top bottle cage bolt to the centre of the inside edge of your handlebar tape.

Add Dimension 5

Maximum 7 characters

No additional dimensions to provide required. Please click "Add To Basket" to complete purchase

Add Kit to Basket Back a step

Back

Enter Dimension CM cm

Confirm dimension Close

You successfully added kit to your basket Go to Basket

* Required Fields

Qty

Optional Accessories

B&M Toplight View Rack Mounted Rear Light - POWERED BY CYTRONEX (must be ordered with headlight)
From £22.00
B&M IQ-XS 80 Lux Headlight - POWERED BY CYTRONEX (must be ordered with rear light)
From £75.00
Long Shackle Padlock for locking Cytronex C1 Lever Bottle Holder
From £11.95
B&M Secula Seatpost Mounted Rear Light - POWERED BY CYTRONEX (must be ordered with headlight)
From £22.00
B&M EYC 50 LUX Headlight - POWERED BY CYTRONEX (must be ordered with rear light)
From £49.00
Cytronex C1 Handlebar Head Light Mount
From £16.50
Cytronex C1 Charger Lead - EU
From £5.95
Cytronex C1 Charger Lead - US
From £5.95